Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Taromid B 280 G8 - PA6-GF40 - Taro Plast S.p.A.

Material Data Center offers the following functions for Taromid B 280 G8:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Taromid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 5 g/10min ISO 1133
Temperatura 250 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 12500 MPa ISO 527
Carico unitario a rottura 210 MPa ISO 527
Deformazione a rottura 2.2 % ISO 527
Modulo a flessione, 23°C 11500 MPa ISO 178
Resistenza all'urto Charpy, +23°C 58 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 15 kJ/m² ISO 179/1eA
ASTM Data
Resistenza all'urto Izod con intaglio, 1/8 in 145 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 222 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 214 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 216 °C ISO 306
Coeff.di dilatazione termica lin., parallelo 25 E-6/K ISO 11359-1/-2
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 0.97 mm -
Indice limite di ossigeno 24 % ASTM D 2863
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica >1E13 Ohm*m IEC 62631-3-1
Rigidità dielettrica 26 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 550 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 5 % Sim. alla ISO 62
Massa volumica 1480 kg/m³ ISO 1183
Caratteristiche
Additivi
Agente di distacco
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore
Caratteristiche
Basso odore
Applicazioni
Automotive, Elettrotecnica ed electrici
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.